Skip to content

Anti-ban shield: pace and pauses

Updated:

On this page

A carrier may block a SIM card that sends hundreds of SMS back to back. The anti-ban shield works like traffic lights at a junction: it lets messages out in batches and adds pauses. This lowers the risk of a block, but it does not rule it out. The full explanation is on the Anti-ban shield page. Here you only find the settings.

Choose the pace in a bulk send

You set the pace in the “Review and send” step of a bulk send, in the “Anti-ban shield” section, in the “Speed” field.

SpeedMessages in a batchPause between batchesGap between messages
Careful10180–480 s8–25 s
Normal2090–240 s5–15 s
Fast4030–90 s3–8 s
  • “Careful” has the lowest risk, for a new SIM or a first large send.
  • “Normal” is a good default for everyday sends. The dashboard preselects it.
  • “Fast” is for a SIM that has sent bulk SMS for a while.
  • “Custom” lets you type your own numbers: a batch of 1 to 200 messages, a gap of at least 2 seconds, and every time at most 3,600 seconds.

Each wait is picked at random between “from” and “to”. Under the speed choice the dashboard shows the estimated time and the expected finish.

Set the phone limits

The limits belong to one phone. Open the dialog in two ways: on the main dashboard click “Anti-ban shield” on the device, or in the send step click “Change phone limits”. The settings:

  1. “Daily limit per SIM card”: the most SMS one SIM sends per day; the rest waits for the next day. An empty field means no limit. The dashboard suggests 150 to start.
  2. “Send only during working hours”: set “From”, “To” and “Time zone”, for example Europe/Warsaw. Outside these hours the send waits and continues the next day.
  3. “Pause the send when SMS keep failing”: after the set number of “Failed SMS in a row” the send stops so you can check the phone. The default is 5.
  4. “Rotate SIM cards”: the send takes turns between both cards, so each one sends less. It needs a phone with at least two active cards.

Click “Save shield settings”. You see “Shield settings saved”.

Pause and resume a running send

Above the bulk send steps you find the “Active bulk sends” section. The list refreshes every 30 seconds.

  1. Find the send. You see the status “In progress”, the number of recipients and “Expected to finish”.
  2. Click “Pause” to stop the send. Messages already handed to the phone are not taken back, and the rest wait.
  3. Click “Resume” when you want to continue.

Paused messages show the status “On hold” in the history.

If the automatic pause stopped the send, the dashboard says: “Paused: 5 SMS in a row did not go out — the carrier may have blocked the SIM. Check the phone, then resume.” Then read the article on a carrier block.

When to slow down

  • You use a new SIM card or send your first large batch: choose “Careful”.
  • Messages start to fail: pause the send, check the phone and only then resume.
  • You send only during the day: turn on working hours.

Questions and answers

Does the shield apply to single SMS?
No. Single SMS messages, such as login codes, always go out at once. The shield applies only to bulk sends.
Does the shield guarantee the carrier will not block the SIM?
No. It lowers the risk because messages do not go out back to back, but it gives no guarantee.

Didn’t find the answer? Contact us

Send your first SMS today

Create a free account, connect your phone and see how customers respond to messages from your number.